SINO SOURCES TECH CO.. LTD. as a leading China steel products manufacturer specialized in production of high quality steel series products and located in Tianjin. The area of Sino Sources Group is about 60,000 square meters with annual steel production capacity reaching to 500,000 MT. Its products’ ranges include steel pipes, tubes, steel sheet and coil, structural steel like steel profile and so on.
Fracture characteristics of spiral pipe
/in News /by Paul1, along the spiral tube in different directions to take samples for tensile testing and impact testing, found that the yield limit and strength limit of the test in different directions is very small difference, generally only in the range of 5-10%, while the cvn value of different directions of specimens vary greatly, cvn value […]
What are the anti-corrosion means of spiral welded pipe
/in News /by PaulBecause of the large mass of spiral welded pipes, they must be stacked outdoors, but it is difficult to avoid being exposed to the sun and rain, so the problem of rust has been plaguing the storage time and conditions of spiral welded pipes. Therefore, it is necessary to provide a comprehensive answer to the […]
Anti-corrosion steel pipe for electrostatic anti-corrosion coating selection
/in Uncategorized /by PaulThe effect of electrostatic spraying of anti-corrosion steel pipe depends not only on the electrostatic spraying equipment and management techniques, but also consider whether the coating varieties used meet the requirements of electrostatic spraying. Electrostatic spraying requires a low resistivity of the coating, the value of 5 to 50MΩ/cm is more appropriate. In addition to […]
Spiral steel pipe hot processing considerations
/in News /by PaulIf oil is attached to the surface of the workpiece during heating, the thickness and composition of the oxide skin on the oil-attached part is different from that of the other parts, and carburization will occur. The part of the base metal under the oxide skin that is carburized will be seriously eroded by acid. […]
How to test the quality of spiral steel pipe
/in News /by PaulSpiral steel pipe in the factory should be done before the mechanical properties of the test and flattening test and flaring test, and to reach the requirements of the specification rules. Spiral steel pipe quality inspection methods: from the appearance of the judgment, that is, in the appearance of the inspection. Appearance inspection of welded […]
What material should be used for anti-corrosion spiral steel pipe
/in News /by PaulSolvent-free epoxy coatings with low viscosity curing agent, cured coating has outstanding anti-corrosion function, hardness resistance and denseness. And there is a relatively suitable use period and curing time. In addition to the insulating property and excellent chemical stability of solvent-free epoxy coating, the coating has made great progress in adhesion, resistance, impact strength and […]
How to classify anti-corrosion steel pipe
/in News /by PaulAnti-corrosion steel pipe is a commonly used carrier for oil and gas transmission, one of the important facilities of ground engineering. It is a steel pipeline that can effectively prevent or slow down the corrosion phenomenon by chemical or electrochemical reaction during transportation and use after processing by anti-corrosion process. Anti-corrosion pipeline is the link […]
What details should be noted when choosing the spiral steel pipe factory wire flux
/in News /by PaulNow the process of domestic spiral steel pipe are double-sided submerged arc welding, double-sided submerged arc welding skills were created and used in 1940, its welding process and hand welding has the same local, is the use of slag welding, spiral steel pipe submerged arc welding and hand welding is different from the local wire […]
Appearance how to test the quality of spiral steel pipe
/in News /by PaulMany users buy spiral steel pipe, due to the lack of professional testing equipment, this time only from the appearance of the quality of spiral steel pipe detection, the following are several common methods of determination. 1, from the surface of the spiral steel pipe to see whether the manufacturing process of spiral pipe is […]
Analysis of the degree of turning of spiral steel pipe
/in Uncategorized /by PaulLongitudinal welded pipe consumption process is simple, high consumption efficiency, low cost, the development of faster. The strength of spiral welded pipe is generally higher than that of straight seam welded pipe, and it can use narrower billet to consume welded pipe with larger pipe diameter size, and it can also use the same width […]