DIRECT FIRE SYSTEM MILL
| ASTM A795 / ASTM A53 / BS 1387 / EN 10255 • UL 852 & FM 1630 Standard Compliance
✓ 100% 50 Bar Hydro Tested
✓ EN 10204 3.1 MTC
✓ AWWA C606 Roll Grooved

Fire Fighting Pipe Manufacturer & Supplier in China (Red Epoxy & Sprinkler Systems)

Sino East Steel is a premier Chinese manufacturer & direct exporter of certified Fire Fighting Steel Pipes, Red Epoxy Coated Sprinkler Pipes (RAL 3000), Hot Dipped Galvanized Fire Pipes, and Ductile Iron Grooved Fittings. Produced from our 65,000 m² Tianjin heavy manufacturing mill with full ISO 9001 quality management, ASTM A795 / ASTM A53 compliance, UL 852 / FM 1630 standards, and 100% 50 bar hydrostatic testing.

● Size Range: 1″ – 12″ (DN25 – DN300) NPS
● Wall Schedule: Sch 10 / Sch 40 Light & Standard
● Coating System: RAL 3000 Red Epoxy & HDG Zinc
● End Prep: ANSI/AWWA C606 Roll Grooved

⚡ 15-Minute Fast Response
📦 MOQ: 1 Ton / Mixed Container
📋 Free EN 10204 3.1 MTC Sample

Red Epoxy Coated Fire Fighting Steel Pipe Factory Direct

Export Packaging & Roll Grooved Pipe Bundles at Tianjin Port

🏭 Direct Mill Wholesale Pricing ($620-$820/MT)
Direct source supply from Tianjin manufacturing base with zero middleman margin. Full container load & package project discounts available.

📜 100% 50 Bar Hydro Tested & 3.1 MTC
Every pipe undergoes 100% hydrostatic testing (5.0 MPa / 725 PSI), ultrasonic weld inspection, and coating cross-hatch adhesion verification.

🚢 One-Stop Pipes + Grooved Fittings Package
Consolidate Red Epoxy Pipes, Galvanized Sprinkler Pipes, and Grooved Fittings/Couplings in 1x20GP container to save total project procurement costs.

Complete Fire Protection Pipe Systems: Standards, Coating & Dimensions

Fire sprinkler systems require exceptionally reliable pipe networks capable of sustaining high hydrostatic pressure, mechanical vibration during water discharge, and severe atmospheric or water corrosion over decades of service. Sino East Steel manufactures an all-inclusive catalog of fire sprinkler pipes and fittings tailored for commercial high-rises, industrial warehouses, chemical processing plants, offshore platforms, and underground fire mains.

Red Epoxy Coated Fire Pipe

Red Epoxy Sprinkler Pipe

ASTM A795 / A53, RAL 3000 Epoxy (50-120 µm), Sch 10 / Sch 40, Roll Grooved Ends.

View Technical Specs →

Galvanized Fire Sprinkler Pipe

Galvanized Sprinkler Pipe

BS 1387 / EN 10255, Hot-Dip Galvanized Zinc 350-550 g/m² for Wet & Dry Systems.

View Technical Specs →

Seamless Fire Protection Pipe

Seamless Fire Standpipe

ASTM A106 Gr.B / API 5L, Heavy Wall SCH 40/80 for High-Rise Risers & Deluge Systems.

View Technical Specs →

Ductile Iron Grooved Fittings

Ductile Iron Grooved Fittings

ASTM A536 65-45-12, Couplings, Elbows, Tees, Reducers (300/500 PSI) with EPDM Gaskets.

View Technical Specs →

Technical Specification Matrices: Schedule 10 vs Schedule 40 & Roll Groove Standards

Specifying the correct pipe wall thickness and mechanical end preparation is essential for hydraulic calculation compliance (NFPA 13) and fast on-site installation. Below are authoritative engineering comparison tables for Schedule 10 vs Schedule 40 fire sprinkler pipes and ANSI / AWWA C606 roll groove tolerances.

Table 1: Schedule 10 vs Schedule 40 Fire Sprinkler Pipe Weight & Pressure Comparison

Nominal Size (NPS / DN) Outer Diameter (OD) Sch 10 Wall (mm / in) Sch 10 Wt (kg/m | lb/ft) Sch 40 Wall (mm / in) Sch 40 Wt (kg/m | lb/ft) Working Pressure Hydro Test Pressure
1″ (DN25) 33.4 mm (1.315″) 2.77 mm (0.109″) 2.09 kg/m (1.41 lb/ft) 3.38 mm (0.133″) 2.50 kg/m (1.68 lb/ft) 300 PSI (2.07 MPa) 50 Bar (5.0 MPa / 725 PSI)
1-1/4″ (DN32) 42.2 mm (1.660″) 2.77 mm (0.109″) 2.69 kg/m (1.81 lb/ft) 3.56 mm (0.140″) 3.39 kg/m (2.28 lb/ft) 300 PSI (2.07 MPa) 50 Bar (5.0 MPa / 725 PSI)
1-1/2″ (DN40) 48.3 mm (1.900″) 2.77 mm (0.109″) 3.11 kg/m (2.09 lb/ft) 3.68 mm (0.145″) 4.05 kg/m (2.72 lb/ft) 300 PSI (2.07 MPa) 50 Bar (5.0 MPa / 725 PSI)
2″ (DN50) 60.3 mm (2.375″) 2.77 mm (0.109″) 3.93 kg/m (2.64 lb/ft) 3.91 mm (0.154″) 5.44 kg/m (3.66 lb/ft) 300 PSI (2.07 MPa) 50 Bar (5.0 MPa / 725 PSI)
2-1/2″ (DN65) 73.0 mm (2.875″) / 76.1 mm 3.05 mm (0.120″) 5.26 kg/m (3.53 lb/ft) 5.16 mm (0.203″) 8.63 kg/m (5.80 lb/ft) 300 PSI (2.07 MPa) 50 Bar (5.0 MPa / 725 PSI)
3″ (DN80) 88.9 mm (3.500″) 3.05 mm (0.120″) 6.46 kg/m (4.34 lb/ft) 5.49 mm (0.216″) 11.30 kg/m (7.59 lb/ft) 300 PSI (2.07 MPa) 50 Bar (5.0 MPa / 725 PSI)
4″ (DN100) 114.3 mm (4.500″) 3.05 mm (0.120″) 8.37 kg/m (5.62 lb/ft) 6.02 mm (0.237″) 16.07 kg/m (10.80 lb/ft) 300 PSI (2.07 MPa) 50 Bar (5.0 MPa / 725 PSI)
6″ (DN150) 168.3 mm (6.625″) 3.40 mm (0.134″) 13.84 kg/m (9.30 lb/ft) 7.11 mm (0.280″) 28.26 kg/m (18.99 lb/ft) 300 PSI (2.07 MPa) 50 Bar (5.0 MPa / 725 PSI)
8″ (DN200) 219.1 mm (8.625″) 4.78 mm (0.188″) 25.26 kg/m (16.98 lb/ft) 8.18 mm (0.322″) 42.55 kg/m (28.59 lb/ft) 300 PSI (2.07 MPa) 50 Bar (5.0 MPa / 725 PSI)
10″ (DN250) 273.0 mm (10.750″) 4.78 mm (0.188″) 31.62 kg/m (21.25 lb/ft) 9.27 mm (0.365″) 60.31 kg/m (40.52 lb/ft) 300 PSI (2.07 MPa) 50 Bar (5.0 MPa / 725 PSI)
12″ (DN300) 323.9 mm (12.750″) 4.78 mm (0.188″) 37.62 kg/m (25.28 lb/ft) 10.31 mm (0.406″) 79.72 kg/m (53.57 lb/ft) 300 PSI (2.07 MPa) 50 Bar (5.0 MPa / 725 PSI)

* Hydraulic Friction Value: Hazen-Williams Coefficient C = 140~150 for Red Epoxy / Hot-Dip Galvanized internal surfaces compared to C = 120 for unlined carbon steel pipe, resulting in up to 25% lower pressure loss over long runs.

Table 2: ANSI / AWWA C606 Standard Roll Groove Dimensions & Machining Tolerances

Precision roll grooving ensures seamless engagement with Victaulic-type mechanical grooved couplings, eliminating leakage risks and guaranteeing joint integrity under seismic movement.

Nominal Size (NPS) Pipe OD Basic (mm) Gasket Seat “A” (±0.76mm) Groove Width “B” (±0.76mm) Groove Dia “C” (+0 / -0.38mm) Groove Depth “D” (Nominal mm) Min Allowable Wall “T” (mm)
1″ (DN25) 33.4 mm 15.88 mm 7.14 mm 30.23 mm 1.60 mm 2.77 mm
1-1/4″ (DN32) 42.2 mm 15.88 mm 7.14 mm 38.99 mm 1.60 mm 2.77 mm
1-1/2″ (DN40) 48.3 mm 15.88 mm 7.14 mm 45.09 mm 1.60 mm 2.77 mm
2″ (DN50) 60.3 mm 15.88 mm 8.74 mm 57.15 mm 1.60 mm 2.77 mm
2-1/2″ (DN65) 73.0 / 76.1 mm 15.88 mm 8.74 mm 69.09 / 72.26 mm 1.98 mm 3.05 mm
3″ (DN80) 88.9 mm 15.88 mm 8.74 mm 84.94 mm 1.98 mm 3.05 mm
4″ (DN100) 114.3 mm 15.88 mm 8.74 mm 110.08 mm 2.11 mm 3.05 mm
6″ (DN150) 168.3 mm 15.88 mm 8.74 mm 163.96 mm 2.16 mm 3.40 mm
8″ (DN200) 219.1 mm 19.05 mm 11.91 mm 214.40 mm 2.34 mm 4.78 mm

Table 3: RAL 3000 Thermosetting Red Epoxy Powder Coating Specification

◆ Coating Thickness:
External 50–120 µm / Internal 50–120 µm (Tested per ISO 2808)
◆ Cross-Hatch Adhesion:
ASTM D3359 Grade 5B (100% adhesion, zero detachment under grid cut)
◆ Impact Resistance:
ASTM D2794 ≥ 50 kg•cm (No cracking, flaking, or delamination)
◆ Flexibility & Bending:
ASTM D522 (Conical mandrel 180° bend test without surface rupture)
◆ Salt Spray Resistance:
ASTM B117 ≥ 1000 Hours (Zero blistering or rust creep along scribed line)
◆ Water Immersion Test:
ASTM D870 at 60°C for 30 Days (Zero blistering, softening, or loss of adhesion)

International Standards, Testing Protocols & Mill Test Certification (MTC 3.1)

To satisfy stringent municipal civil defense regulations, global EPC engineering standards, and international insurer requirements (such as FM Global and AXA XL), Sino East Steel maintains full compliance with international standards and subjects every single pipe batch to destructive and non-destructive laboratory testing.

COMPLIANCE

UL 852 & FM 1630 Standards

Our pipes meet the exacting criteria of UL 852 (Standard for Metallic Sprinkler Pipe for Fire Protection Service) and FM Approvals Class 1630. This verifies high bursting pressure resistance, strict dimensional tolerances, and high-temperature integrity in active deluge and automatic sprinkler services.

  • ASTM A795 Type E (Electric Resistance Welded) & Type S (Seamless)
  • ASTM A53 Grade B Fire Service Standard
  • BS 1387 & EN 10255 Heavy / Medium Series

TEST PROTOCOL

100% 50 Bar Hydrostatic & UT Testing

Zero defects policy: Every individual fire protection pipe undergoes an automated 100% Hydrostatic Pressure Test holding at 5.0 MPa (50 Bar / 725 PSI) for 5 to 10 seconds. Continuous online Eddy Current & Ultrasonic Testing (UT) inspects the entire ERW longitudinal weld seam.

  • Digital real-time pressure holding data logs
  • 100% Eddy Current inspection per ASTM E309
  • Flattening & bending weld ductility tests per ISO 8492

TRACEABILITY

EN 10204 Type 3.1 MTC Guarantee

All shipments are issued with genuine EN 10204 Type 3.1 Mill Test Certificates detailing exact heat numbers, chemical composition, and mechanical properties. Third-party witness inspection (SGS, Bureau Veritas, Intertek, TÜV) is fully supported prior to container loading.

  • Yield Strength: ≥ 240 MPa (35,000 PSI) | Tensile: 415–550 MPa
  • Chemical Limits: C ≤ 0.25%, Mn ≤ 0.95%, P ≤ 0.035%, S ≤ 0.035%
  • 100% Traceable Heat & Batch Stenciling on Pipe Bodies

ENGINEERING SOURCING TOOL

1x20GP Mixed Container Fire System Sourcing Calculator

Max Loading Weight: 26.0 – 27.5 Metric Tons (Port-dependent)

Optimize your project freight and eliminate local warehousing markups by consolidating steel fire pipes, grooved couplings, and sprinkler fittings into one single 20GP container loaded directly at Tianjin Port.

📦 Package Component A: Main Pipes
18 – 22 Metric Tons
Red Epoxy Coated or Galvanized Fire Pipes (DN25 – DN200) bundled in hexagonal export steel straps with end cap protectors.

🔧 Package Component B: Grooved Fittings
3 – 5 Metric Tons
Ductile Iron Rigid/Flexible Couplings, 90° Elbows, Mechanical Tees, and Reducers packed in export cartons on fumigated pallets.

💰 Estimated Wholesale Cost
$16,500 – $22,800 USD
FOB Tianjin Port / CIF worldwide ports. Save up to 30% compared to local distributor sourcing.

FIRE SYSTEM PROCUREMENT FAQ

Frequently Asked Questions: Fire Fighting Pipes & Grooved Fittings

❓ What standards and manufacturing specifications do Sino East fire fighting pipes comply with?

Our fire fighting pipes are manufactured in full compliance with ASTM A795 (Type E/F/S), ASTM A53 Grade B, BS 1387, EN 10255 (Heavy/Medium), ISO 65, and UL 852 / FM 1630 standards. They are engineered specifically for wet and dry fire sprinkler systems, fire main standpipes, and deluge networks.

❓ What is the difference between Schedule 10 and Schedule 40 fire sprinkler pipes?

Schedule 10 fire sprinkler pipes have a lighter wall thickness designed specifically for roll-grooving and high hydraulic flow capacity (Hazen-Williams C = 140~150), reducing overall building structural load and piping costs. Schedule 40 pipes have a heavier wall suitable for both roll grooving and threading (NPT/BSPT), offering enhanced mechanical resistance for high-pressure fire risers and underground mains.

❓ What roll groove tolerances conform to ANSI / AWWA C606?

Our roll grooved ends are machined to strict ANSI / AWWA C606 specifications with gasket seat width ±0.76mm, groove width ±0.76mm, and groove diameter +0 / -0.38mm. This precise machining guarantees 100% leak-proof sealing and full mechanical interlock with Victaulic and standard grooved couplings.

❓ What hydrostatic test pressure and quality certifications are provided?

Every single pipe undergoes a 100% automated Hydrostatic Pressure Test holding at 5.0 MPa (50 Bar / 725 PSI) for 5 to 10 seconds without pressure drop or leakage. Each shipment is accompanied by an official EN 10204 Type 3.1 Mill Test Certificate (MTC), Eddy Current inspection reports, and coating adhesion test records.

❓ What is the factory wholesale price and MOQ for fire sprinkler pipes?

Direct factory FOB prices for Red Epoxy Coated and Hot-Dip Galvanized fire sprinkler pipes range from $620 to $820 per metric ton depending on nominal size, wall schedule, and roll groove machining. Our minimum order quantity (MOQ) is 1 Metric Ton or mixed container orders.

❓ Can fire sprinkler pipes and ductile iron grooved fittings be consolidated in one container?

Yes! We specialize in consolidated 1x20GP container loading combining 18–22 Metric Tons of bundled sprinkler pipes with 3–5 Metric Tons of palletized ductile iron grooved elbows, tees, couplings, and valves. This eliminates multi-supplier coordination and significantly reduces import freight costs.


GLOBAL FIRE PROTECTION SOURCING DESK

Ready to Source Fire Fighting Pipes & Grooved Fittings at Mill Export Pricing?

Send your project bill of quantities (BOQ) with required pipe diameters, wall schedules, coating type, and destination port. Our export team provides official CIF proforma quotations and EN 10204 3.1 MTC samples within 15 minutes.

⚡ Fast Response Guaranteed  |  🏭 65,000 m² Mill in Daqiuzhuang, Tianjin  |  🚢 Container Loading at Tianjin Xingang Port