We all know that the stainless steel seamless steel pipe will generally undergo some special treatment when it first leaves the factory, so that the surface looks bright and will not have rust, but when we use it for a long time, coupled with the environment and other factors, there will still be some rust phenomenon, so how do we want to clean the rust for stainless steel seamless steel pipe? The following small part will introduce you in detail.

After the production of stainless steel seamless tube will generally carry out a procedure, that is, “pickling”, pickling for stainless steel tube can remove the surface pollution stains. The surface of the stainless steel seamless tube is acid white after production.

Before pickling and passivation, the surface of the stainless steel pipe must be cleaned of weld skin, spatter, burr, dirt, etc. The surface of the stainless steel pipe should be wiped clean with gasoline or other organic solvents. If it is a large area of dirt can be cleaned with steam or 3 ~ 5% caustic soda (NaOH) solution, and then rinsed with clean water, cool and dry. Note that the CL-concentration of clean water used should not exceed 25mg/l.

What should be done when the surface of stainless steel seamless pipe is slightly rusty or other dirty things are difficult to wash away? You can consider using the process of acid spinning to clean the slight rust on the surface of stainless steel thick-walled tube without destroying the layer of oxide film on the surface of stainless steel tube or other substrate of stainless steel tube, and the dirt on the surface of stainless steel seamless tube will disappear, so that the surface of stainless steel tube can be purified.

The above is a small introduction to how to clean the rust on the stainless steel seamless steel pipe, in addition, if you hope that the stainless steel seamless steel pipe in the cleaning process does not damage the performance of the steel pipe case, then we need to make the surface of the stainless steel seamless steel pipe through the passivation process technology to improve the rust resistance.